作为表面增强拉曼光谱基底的高度均匀Au纳米棒的构筑及对福美双的检测

采用种子生长法制备Au纳米棒(GNRs),随后进行组装和煅烧得到单层致密堆积的GNRs薄膜。在煅烧过程中,组装所需有机物在煅烧过程中分解,从而使得GNRs表面具有较高的清洁度。研究中发现,煅烧前后金纳米棒表面的间隙进一步提高,增强了其SERS(表面增强拉曼光谱)活性。为了研究其SERS活性,选择了2种探针分子以研究其灵敏度和均匀性,发现其具有较高的灵敏度和高的信号稳定性。随后将所制备的SERS基底成功用于检测超低浓度的农药分子。     

液相色谱串联质谱法测定水果中复硝酚钠残留量

以甲醇提取样品,采用超高效液相色谱串联质谱法(UPLC–MS/MS)测定水果中复硝酚钠的残留量。以甲醇–10 mmol/L乙酸铵水溶液(体积比为60∶40)为流动相,质谱采用电喷雾负离子MRM检测模式。对硝基苯酚钠和5-硝基愈创木酚钠的线性范围为0.05~2.00 mg/L,检出限为0.01 mg/kg,邻硝基苯酚钠的线性范围为2.5~100.0 mg/L,检出限为0.5 mg/kg,线性相关系数均大于0.995。实际样品中对硝基苯酚钠、邻硝基苯酚钠和5-硝基愈创木酚钠的加标回收率分别为83.0%~93.4%,81.0%~87.4%,83.0%~91.8%,测定结果的相对标准偏差小于7%(n=6)。该法操作简单、快捷,精密度、准确度高,适用于水果中复硝酚钠的残留分析。     

高效液相色谱-串联质谱法同时测定茶汤中7种苯甲酰脲类农药残留

建立了高效液相色谱-串联质谱(HPLC-MS/MS)法,结合溶剂提取和固相富集技术同时测定茶汤中氟啶脲、除虫脲、啶蜱脲、氟虫脲、氟铃脲、伏虫隆和杀铃脲7种苯甲酰农药残留的方法。研究了提取溶剂的种类、用量和提取时间,以及固相富集小柱的固定相和流动相对7种苯甲酰脲类农药的提取率、分离度、灵敏度和重现性等的影响。结果表明,在最佳条件下,7种苯甲酰脲类农药在6.5min内被完全分离。7种苯甲酰脲类农药残留的检测限(DL)和定量限(QL)分别为0.08~1.00ng/mL和0.09~3.02ng/mL,加标回收率为90%~105%,相对标准偏差(RSD)小于7%(n=6)。利用所建立的方法成功测定了不同茶汤中上述7种苯甲酰脲类农药残留。该方法具有耗时短、灵敏度高、稳定性好等优点,有助于茶叶安全饮用的准确评价。     

???????????????????????????????

应用动态应变测试方法对悬挂式残膜回收机悬挂架进行实地动应力测 试，通过数据处理及其分析，得到悬挂架在工作条件下的应力状态，以及不同工作状态下各 构件的应力情况，并对悬挂架进行了疲劳强度分析，为进一步改进设计提供必要的理论依据.     

Relations Between Relaxation Modulus and Creep Compliance in Anisotropic Linear Viscoelasticity

The results obtained previously for scalar and class P completely monotone relaxation moduli are extended to arbitrary anisotropy. It is shown for general anisotropic viscoelastic media that, if the relaxation modulus is a locally integrable completely monotone function, then the creep compliance is a Bernstein function and conversely. The elastic and equilibrium limits of the two material functions are related to each other. The relaxation modulus or its derivative can be singular at 0. A rigorous general formulation of the relaxation spectrum in an anisotropic viscoelastic medium is given. The effect of Newtonian viscosity on creep compliance is examined. Put some makeup on him and lay him to rest. Anonymous     

Making Use of the Direct Process Residue: Synthesis of Bifunctional Monosilanes

The industrial production of monosilanes Me_nSiCl_4−n (n=1–3) through the Müller–Rochow Direct Process generates disilanes Me_nSi₂Cl_6−n (n=2–6) as unwanted byproducts (“Direct Process Residue”, DPR) by the thousands of tons annually, large quantities of which are usually disposed of by incineration. Herein we report a surprisingly facile and highly effective protocol for conversion of the DPR: hydrogenation with complex metal hydrides followed by Si−Si bond cleavage with HCl/ether solutions gives (mostly bifunctional) monosilanes in excellent yields. Competing side reactions are efficiently suppressed by the appropriate choice of reaction conditions.     

Molecular insight for the role of key residues of calreticulin in its binding activities: A computational study

Calreticulin (CRT) is localized to and has functions in multiple cellular compartments, including the cell surface, the endoplasmic reticulum, and the extracellular matrix. Mutagenesis studies have identified several residues on a concave β-sheet surface of CRT critical for CRT binding to carbohydrate and other proteins/peptides. How the mutations of these key residues in CRT affect the conformation and dynamics of CRT, further influencing CRT binding to carbohydrates and other proteins to signal the important biological activities remain unknown. In this study, we investigated the effect of three key point mutations (C105A, C137A and W319A) on CRT conformation and dynamics via atomistic molecular dynamics simulations. Results show that these three key residues mutations induced the changes of CRT local backbone flexibility and secondary structure of CRT N-domain, which could further affect CRT’s binding activity. C137A mutation led to dramatic decrease of the overall size of CRT due to the P-domain fold back to the globular domain and formed new inter-domain contacts, which can cause blockage of CRT’s binding with other large substrates. Furthermore, for CRT concave β-strand surface patch containing lectin binding site, CRT C105A, C137A and W319A point mutation resulted in the changes in solvent accessible surface area, key residues’ side chain atom positions and dynamical correlated motions between residues. All these changes could directly affect CRT binding behavior. Results of this study provide molecular and structural insights into understanding the role of key residues of CRT in its binding behavior.     

Modular class primes in the Sundaram sieve

The purpose of this paper is to consider analogues of the twin-prime conjecture in various classes within modular rings.     

Quantitative analysis of precious metals in automotive shredder residue/combustion residue via EDX fluorescence spectrometry

The recovery of precious metals from automotive shredder residue (ASR) dust/combustion residue is an option that is not usually considered due to the lack of available information. Therefore, before any disposal or recovery application can be considered, it is necessary to determine the significance of the levels and distribution of precious metal in ASR dust/ASR combustion residue. In the present study, quantitative analysis of precious metals (Pt, Pd, Au, Ag and Cu) in the ASR residue samples was performed using energy dispersive X-ray (EDX) fluorescence spectrometer. With the fundamental parameter (FP) method, the X-ray intensity is obtained and the quantitative analysis is performed using theoretical calculation. This method is very effective for quantitative analysis of unknown samples without standard samples. Further, in order to analyse the precious metal distribution within the ASR combustion residues, the microstructural characterisation and elemental mapping were also carried out with the aid of field emission scanning election microscopy combined with electron dispersive spectroscopy (FE-SEM EDS). Significant amount of Pt, Pd, Au, Ag and Cu element concentrations in the ASR residue were identified. Total precious (Pt, Pd, Au, Ag and Cu) metals obtainable values are representing about 12.23 wt% from its initial ASR dust/combustion residues. Considering their relevant concentrations, these metals should be properly recovered for recycling purposes before to dispose or landfill.